Instructions / Assembly
5
10 11 12 13 14 15
6
3 4 7
1
2
3
4
5
6
10
11
12
13
7
8
9
1 2
8
9
Technical Support and E-Warranty Certificate
www.vevor.com/support
Hazardous substance and content table
Product features
Electric breast pump
Intelligent frequency conversion mode
Intelligent touch screen
Milk collection and storage design
Multi-level adjustment
Large capacity lithium battery
Product specifications
Name
Input
voltage
Lithium
battery
Rated
power
Model
Package
Executive
standard
Recommended
room
temperature
Year of
manufacture
Place of
origin
Use
environment
Battery
voltage
No. Name Material Temperature resistance QTY
7
8
9
10
11
12
13
Product part
Panel indication
Battery removal instructions
Button description
Suction increase button. (A total of 16 levels, level 16 is the most powerful)
Suction decrease button. (A total of 16 levels, level 1 is the weakest)
Short press or long press to light up the light, then short press to enter level 2, then
short press again to turn off the light.
Short press or long press to choose the single side pumping or double sides pumping.
press to cycle through lactating mode, pumping mode and simulation mode.
Press and hold 2S to turn on/ off, press to pause, the machine shuts down automati-
cally after pausing for 5 minutes without operation; the product automatically shuts
down after working for 30 minutes.
Power button
Switch mode
Increase level
Decrease level
Night light button (optional)
Single/ double pumping change button
Icon description
Precautions when discarding products
Please follow the steps below until the battery supplied with the
product is removed
Put the battery in the special
recycling bin
Take out the battery inside
the main unit
Note: This battery disassembly manual is a general battery disassembly manual for breast
pumps， and there are slight differences in the battery disassembly process of different
breast pump models. If you encounter difficulties in disassembling the battery， please
contact the after-sales personnel for support.
Assembly method
Operating instructions
Power connection
WARNING
DANGER
CAUTION
CAUTION
Unplug it from the power socket immediately after use.
Do not use the breast pump while bathing.
If the product is dropped in water, do not touch it and unplug it from the power socket immediately.
Do not expose your breast pump to high temperature or direct sunlight.
If the product or the power adapter is damaged, to avoid danger, it must be replaced by the
manufacturer, or professionals in the maintenance department or similar department.
Bottles and pacifiers shall be used under adult supervision;
Long-term sucking will lead to caries;
Do not use the microwave to heat this product.
Do not use the pacifier to soothe your baby; check the temperature of the food before feeding.
Do not use bottle and any parts of the bottle as toys.
It is forbidden to use or charge/ discharge near the fire source or in an environment
where the temperature exceeds 45 °C.
Charge before use for the first time.
When disassembling and cleaning, please be careful with small parts, avoid loss
that may make it impossible to assemble or the machine not to operate.
Set the suction power according to your personal constitution and complete the
pumping work with comfortable suction.
To stop using, please turn off the power first.
Do not tilt or overfill the bottle (do not exceed the maximum scale).
If you want to use the breast pump during the low milk production stage, please
use it according to the guidance of your doctor or nursing personnel.
Before using a bottle for your baby, please measure the temperature of the liquid
inside the bottle to prevent burns.
When disassembling or assembling, please assemble each part in order.
It is strictly forbidden to put the machine and USB charging cable into liquids, such
as water, gasoline, drinks, etc.
It is strictly forbidden to throw the machine into the fire or heat it.
Do not allow children to play with the product packaging bag to avoid the risk of
choking.
Keep all parts that are not used out of the reach of children to avoid swallowing by
children or other dangerous accidents.
Please take good care of children, make sure they do not play with this product, and keep it
out of the reach of children or pets.
Cleaning and sterilizing
Before using the breast pump for the first time, clean and sterilize all parts except
the machine, please follow the cleaning and sterilizing instructions in sections 1.2
and 1.3 below.
Use only drinking or bottled water for cleaning.
Wash all parts that come into contact with the breast
and milk separately after use to avoid drying out the
milk residue and prevent bacterial growth.
Clean all parts except the main unit that comes into contact with the breast and
milk, disassemble the breast pump assembly into separate parts, and rinse all
separated parts in contact with the breast and milk in cool water to remove milk
residue.
Mild detergent, cleaning sinks or bowls, cleaning towels or soft brushes, drinking
water quality, sinks.
Immerse all separated parts in mild water for 5-10 minutes, clean with a clean rag
or soft brush, and rinse all separated parts with clean water.
Allow all parts to air dry in a clean place.
Do not over-pump to prevent breast injury.
If you have problems or pain, please consult your breastfeeding specialist or doctor.
Do not use this machine as a milk opener. The breast pump is a tool to help mothers
after birth relieve the pain of engorgement and prolong breastfeeding, and its use is
provided that there is enough milk and unobstructed mammary glands. Some
mothers often have breast gland obstruction (some of which are caused by congeni-
tal nipple depression) or insufficient milk when they are new mothers, so it is
recommended to first conduct a professional examination of the breast and confirm
that the breast glands are smooth and the milk is normal before buying and using a
breast pump.
Breast pump parts that come into direct contact with milk are personal care items
that are not shared by mothers.
Do not use a breast pump during pregnancy as pumping may cause miscarriage.
If milk is not expressed, do not continue pumping for more than 5 minutes.
This product is intended for the purposes described in this manual only.
Fault cause: The machine cannot start
Fault cause: Insufficient suction
Fault cause: The gear indicator shows “E�” code
Troubleshooting
Store/ heat milk
CAUTION:
WARNING:
Note:
Lithium battery use precautions
4. Screw the wide-mouth
bottle into the bottom of
the tee, ensure tight fit.
(As shown in the figure).
5. Insert the connecting tube assembly into the host air
inlet to ensure a tight fit between the two. If only one side
sucks milk, insert the connecting tube plug component
into the left air inlet of the host. (As shown in the diagram)
This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves a clear interpretation of our user manual.
The appearance of the product shall be subject to the product you received.
Please forgive us that we won't inform you again if there are any technology
or software updates on our product.
FCC Information
Note:Please check whether the relevant accessories are assembled correctly before
pumping