Instructions / Assembly

Picture 1

1. Vital: turn o the power switch, connect the video camera and the monitor, or the video camera and

the monitor may be damaged.

2. Connect the camera to 3-coil plug, 2-cell box and the 1-monitor. (Pic.1)

3. Turn on the power switch in the power box, the indicator light of the monitor is on, the switchboard

stas.

4. Install the video camera with the protective cover slightly and put it into the pipe, rotate the coil to a

proper depth.

5. Adjust LED light degree adjuster to proper light degree.

For videotape, refer to the DVR operation details (display operation:Recording Type )

6. Switch video to another large screen through video line.

7. After utilization, mover the camera from the pipe carefully, take a clean, soft and d cloth to clear up

it and put it back.

System Installation

1. Monitor Video

2. Power of Monitor

3. Adjacent Coil Plug

4. AV Output

5. Batte Indicator

6. Power Input for Charger

7. light-Degree Adjustment for White Light Led

8. Power Switch

9. Power Light

3. Cell Box