Instructions / Assembly
Your skill at handling this receiver and recognizing its strengths and weaknesses is what makes a
locating job successful. Before taking them out on their rst job,make sure you understand how the
system works.
The 512 only has one mode which is“sonde”mode.In the sonde mode, the receiver searches for the
signal transmitted by a small sonde or camera with a built-in transmitter that has been routed through
a pipe. The sonde must emit a 512Hz signal and the receiver can determine the approximate depth of
the target.
The 512 is designed to be intuitive and requires minimum of training for eective use of the instrument.
The controls and the information display area are large and easy to understand. Yet they include
evething necessa to control the receiver with your thumb.
The following sections will take you through all the steps necessa to use your equipment. We strongly
recommend that you pay close attention to the section“Getting to know your tools”, and come back to
it when you are confused about the responses you are seeing on actual locating jobs.
INTRODUCTION
KNOW YOUR ANALOG RECEIVER
10