Instructions / Assembly

- 8 -

4.Pull the label across C,D, then around E and down, and then across

between F and G.Finally Wrap the label backing paper tightly around the

scroll(H) and attach the paper clip as shown.

Note:a) The installed labels should be aligned smoothly from the fixed axis

to the scroll.(from beginning to end) Otherwise, the label will be easily torn.

b) It is recommended that the label be wrapped around the scroll at least 2

to 3 times.

c) Adjust the pairs of limit rings on the rollers (C )so that they guide the

label as shown

d）The roller(G) can be loosened to allow the label to pass through.

The roller(G) must press the label tightly when working.