Instructions / Assembly

- 16 -
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
The
suction cup
did not
rise
Air pressure is
insufficient.
Provide adequate air
supply.
The suction cup fails to
absorb the label.
The position of the
suction cup is set
improperly.
Readjust the position of
the suction cup.
The reserved label is too
long
Shorten the reserved
label length.
The angle of the blow
pipe is unreasonable
Adjust the Angle of the
blow pipe.
Label stripping failure
The scroll rolls have too
much label backing
paper.
Clear label backing paper
The scroll slips around
the label backing paper.
Label backing paper is
wound tightly around the
scroll.