Manualshelf

Instructions / Assembly

ManualsBrandsVEVOR ManualsLabel MakersElectric Flat Labeling Machine 25-60 pcs/min Flat Surface Label Applicator for Size Range of 4.7 x 5.9 x (0.98-3.54) in.
11121314151617181920
- 14 -
4. Blowpipe Angle setting
Loosen the screw and turn the blowpipe so that the air outlets slope up 40
to 50°,Then lock the screw.
Note:There is a row of small air outlets in the blowpipe.
5.The work table is provided with positioning frames in two directions.
Put the flat objects on the worktable and adjust the position of the
positioning frame according to the need for labeling as shown.
6.After the above installation and adjustment are completed,Press the foot
switch to start the labeling work.
Blowpipe
Screw