Instructions / Assembly

- 2 -
WARNING
Read all safety warnings, instructions, illustrations and specifications
provided with this pond aeration. Failure to follow all instructions listed
below may result in electric shock, fire, and/or serious injury.
Basic Safety Information:
1. Pulling or dragging the product with the power line is not allowed.
2. When pulling out the plug, please hold the plug itself, do not pull the
power cord.
3. Do not cut and replace the power plug by yourself. Otherwise, serious
consequences may incur.
4. Operation of the product is not allowed in case of damage to the power
5. line or the shell.
6. The disassembling and dismounting of the product by non-professionals
is not allowed.
7. In case the electrical magnetic air pump drops into water, please cut off
the power supply before dredging it out. Then it should be handed over to
professionals for check and maintenance.
8. Electrical shock hazard: Do not touch the electrical magnetic air pump
with wet hands or while standing on a wet surface. Always use the
electrical magnetic air pump in a dry environment and plug it into a properly
grounded outlet.
9. Fire hazard: Do not use the electrical magnetic air pump near
flammable or combustible materials. Keep the electrical magnetic air pump
away from sources of heat or sparks, such as flames, cigarettes, or
electrical appliances.
10. Explosion hazard: Do not use the electrical magnetic air pump with
gases that are flammable, explosive, or poisonous. Always check the
safety data sheet (SDS) of the gas before using it with the electrical
magnetic air pump. Additionally, do not exceed the specified pressure
range for the electrical magnetic air pump.
11. Corrosion hazard: Do not use the electrical magnetic air pump with