Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRICAL MAGNETIC AIR PUMP MODEL: ACO-005 We continue to be committed to providing you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us.
ELECTRICAL MAGNETIC AIR PUMP MODEL: ACO-005 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
IMPORTANT SAFEGUARDS WARNING： Read all safety warnings, instructions, illustrations and specifications provided with this pond aeration. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Basic Safety Information: 1. Pulling or dragging the product with the power line is not allowed. 2. When pulling out the plug, please hold the plug itself, do not pull the power cord. 3. Do not cut and replace the power plug by yourself.
gases that can corrode metals or exert chemical charges. Check the compatibility of the gas with the materials of the electrical magnetic air pump and its accessories. Always use protective gloves and eyewear when handling corrosive materials. 12. Do not use a damaged plug or outlet, as this can cause electrical shock or fire. 13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. 14.
INSTRUCTION MANUAL PREFACE Dear Customers: Many thanks for your choice of ACO series magnetic air pump. For more efficient performance and safety, please kindly read this manual carefully and keep it good for future reference. Hope the air pump could satisfy you well. SCOPE OF USE This series of pumps is a non-lubrication one, which gives off very clean air.
DIRECTIONS FOR USE Installation and connection instructions: The air pump is plugged in first, the hose is plugged in the air pump, the distributor is plugged in the hose, the soft tube is plugged in the distributor, and the stop valve is plugged in the soft tube。 Air pump Connecting hose Air distributor Air hoses Check valves Conneted to air hoses The use of power (voltage and frequency) allows fluctuations±10% with the power indicated on the air pump nameplate (labels) not too high or too low are nor
The working environmental temperature should be within 0 ℃~35 ℃, and maintaining good ventilation and smoothness to prevent excessive temperature rise. The air pump should be prevented from being rain-drenched and soaked with water, not in the heat of the sun or the dusty environment. Before using it, make sure the earth line is well-equipped. Do not touch the power with wet hands. If it falls into the water, please cut off the power first and then take it out of the water.
If you find an electricity leak, please cut off the power at once. You should use it after it is repaired. The pump must be installed flatly 20 centimeters above the water level and kept immovable in order to prevent liquid from flowing back and the pump from breaking. The pump couldn't bear oil, water, and collision.
You should clear the filter sponges at least once every month. The general acreage of the tube should not be less than 85% of the acreage of the pump outlet. Try to equip the tube with a bend of fewer than 120 degrees to avoid excessive pressure losses and affect results. Cut off the power if you don't use it for a long time and put it in a ventilated place. Please operate it for about ten minutes every month in order to make sure it is not broken and could run smoothly when you need it.
The machine generates heat during operation, which can slightly warm the air and water. If temperature sensitivity is critical for the aquatic environment, it is recommended to pass the air tube through a simple chiller water tank before entering the aquarium to prevent an increase in aquarium temperature.
Troubleshooting： Issue of working Possible causes The noise becomes louder Improper installation causes wear of after a period of moving parts Recommended solutions Follow horizontal installation instructions, use rubber feet for shock absorption. time Avoid installation in open area and avoid water. Avoid installing water levels It cannot be Fuselage water damage higher than the machine. used after a Equipped with check valve period of time fittings to prevent back-flow.
OUTLOOK DIMENSIONS (Model) L (mm) K (mm) N (mm) I (mm) H (mm) M (mm) ACO-005 215 82 98 79 132 99 - 11 -
STRUCTURE DIAGRAM NO. NAME NO. NAME NO.
FUNCTION CURVES FOR YOUR REFERENCE FOR YOUR REFERENCE - 13 -
TECHNICAL TABLE (Model) (Voltage) ACO-005 220V/50Hz (Power) (Pressure) (Output) (Weight) 80W 0.035MPa 70L/min 2.8kg (Dimensions) 212x99x132mm FCC statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Technical Support and E-Warranty Certificate www.vevor.
