Use and Care Manual

- 11 -
INSTALLATION NOTES
1. The supply voltage must be consistent with the supply voltage of the
product nameplate.
2. The furnace should be placed on the balance left and right side of the
left objects 10cm or more, on the back should be away from combustible
material (such as brick, etc.) 20cm
Or more. Work can not be placed at the top of combustible materials
such as towels, clothing, etc.
3. When used, can not open the door to pick and place items in order to
avoid danger (cut off the power).
4. The device temperature adjustment range is between 50-350 ℃; it is
recommended that the normal use temperature of 200-300 ° C
(depending on the need to adjust themselves to the set temperature).
5. Near the installation location is no flammable and explosive materials
storage.
6.The product installation should be invited professional and technical
personnel to operate, who are not free to make changes.
7. Electrical connection and furnace installation should be invited to hold
the electrical operating permit to install.
TRANSPORTATION AND STORAGE
During transport, the product should be handled carefully, not upside
down, to prevent damage to the shell and internal. The packaging has a
sound effect and should be placed within the warehouse of
well-ventilated, non-corrosive gases. Need temporary storage should be
taken when the rain measures.
DAILY CHECKS
Before and after use to pay attention to check the machine status
Before using the machine is tilted?