Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRIC PIZZA OVEN USER’S MANUAL Model：ZH-PT-21M/ZH-1M/ZH-3M /ZH-PT-1D/ZH-PT-1M We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
ELECTRIC PIZZA OVEN NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
INSTRUCTIONS Welcome to purchase and use our electric pizza oven! Give full play to the performance of this product, to reduce unnecessary losses and injuries, read the instructions carefully before use and retain for future reference. This series of products is to absorb foreign and domestic benefits of the product of the same type of design is made, fashionable and vivid color, reasonable structure, convenient operation, fast heat up, good insulation properties, energy-saving advantages.
. To protect against risk of electric shock, do not immerse the cord, plug or cooking unit in water or any other liquid. When cleaning, cut off the power, do not direct spray water to the product. Water conductivity, the product may cause an electric shock due to leakage. Do not pat the product or place heavy objects on the product, normal operation can cause equipment damage and danger. 5.
13. To reduce the risk of burns,electrocution,fire or injury to persons! a) Do not disassemble the unit except for the authorized serviceman. b) Unplug the unit before filling it. Do not exceed the MAX mark. c) Do not touch the socket with wet hand to reduce the risk of electrocution. Attention! 1. Occurrence of thunder and lightning, disconnect the power as soon as possible to avoid lightning damage. Prohibit the use of complex, sharp objects to damage the body surface and the control panel.
Frequen cy (Hz) 60 60 60 60 60 Dimensi ons (mm) 560×556× 435 560 × 556 × 270 585x584x 290 485x390x 215 485x390x 215 Inner size (mm) 400×400× 150 400 × 400 × 150 445*445*1 50 345x342x 120 345x342x 120 Layers 2 1 1 1 1 PRODUCT BRIEF Maintenance of three-dimensional exploded view: ZH-1M/ZH-PT-21M： -5-
1.outermost shell 2.Inner tank 3.left and right sealing plates 4.cotton pressing positioning plate 5.under the cotton plate 6.on the cotton plate 7.ceramic wafer 8.heating tube 9.door 10.rubber feet 11.control box sealing cotton 12.light barrier 13.layer frame 14.time-meter 15.temperature controller 16.pilot light 17.
1.pizza stone, 400*400*9.5mm 2.heating tube, 3.inside components 4.support place of pizza stone 5.downside support plate of heating tube 6.lampshade 7.Heat lamp 8.board that holds down cotton 9.Five cylinder terminal 10. left and right plate of machine 12.support plate of inside components 13.outside components 14. Cable head 15.power line 16.Before frame components 17.components of door 18.on-off switch 19.timer 20.Thermostat 21.indicator light 11.
1.the new baseplate 2.rubber feet 3.the new sundry basin 4.the new baked net fixed strip 5.the new left board 6.left cotton plate 7.the new left and right sealing plate 8.the new heating tube 9.heat tube fixed plate 10.after the sealing plate 11.top pressure cotton 1 12.the new top pressing cotton board 13.the new top tray 14.the new upper side connecting plate 15.turbine stent 16.right cotton plate 17.drawer components 18.time-meter 19.single jade eye switch 20.temperature controller 21.
1.rubber feet 11.grill net fixing strip 2.sundry basin 12.probe bracket 3.inner chamber right plate 13.the right board 4.the left board 14.left and right sealing plates 5.left sealing cotton board 15.temperature control bracket 6.heating tube fixing plate 16.time-meter 7.upper connecting plate 17.right sealing cotton board 8.after the sealing plate 18.drawer assembly 9.top pressing cotton 1 19.heating tube 10.top tray 20.
ZH-1M ZH-PT-21M ZH-PT-1M ZH-PT-1D - 10 -
INSTALLATION NOTES 1. The supply voltage must be consistent with the supply voltage of the product nameplate. 2. The furnace should be placed on the balance left and right side of the left objects 10cm or more, on the back should be away from combustible material (such as brick, etc.) 20cm Or more. Work can not be placed at the top of combustible materials such as towels, clothing, etc. 3. When used, can not open the door to pick and place items in order to avoid danger (cut off the power). 4.
Are power lines aging, cracked, or broken? The control panel is not damaged? Is it heated? Is there no abnormal noise or loss of control? WARNING! Must often carry out routine inspections. Regular checks of the product can prevent serious accidents have occurred. Feel the circuit, and stop using the machine failure. They have notified as soon as professional and technical personnel are inspected and maintained.
H1,H2,H3: Heating indicator HL: Lighting CLEANING AND MAINTENANCE 1.Before cleaning off the power to prevent the occurrence of an accident. 2. Work a week after the wet towels are available free of corrosive detergent, and scrub the pizza plate, body surface, and the power cord. Never use water to flush directly. Prevent the water from penetrating the destruction of the electrical properties, resulting in electrical safety incidents. 3.
we suggest you out this machine on stainless steel table, and do not put flammable materials under machine THE GENERAL FAULT DIAGNOSIS malfunction reason methods 1 Switch on the power supply, the indicator light is on, but the machine does not heat up 1.Thermostat damaged. 2.The heating tube burns out 1.Replace the temperature controller 2.
Technical Support and E-Warranty Certificate www.vevor.
