Use and Care Manual

- 2 -
Product Description
The EPDM pond liner is a single-ply membrane used for various
applications such as waterproofing basements, roofs/terraces,
expansion joints, wet areas (toilet blocks), facades, etc. It is a
product that can waterproof most parts of a building. The EPDM
pond liner is techno-commercially much better than substitutes
such as bitumen membranes, crystalline products, admixtures,
various coatings, etc. Therefore, these products may be avoided
in projects where EPDM pond liner is used. The EPDM pond liner
is an excellent substitute for the torch-on membrane.
The EPDM rubber roofing membranes are manufactured in large
sizes to reduce the joints. The thicknesses are from 0.8 mm (30
mils) to 6.0 mm (235 mils). All the EPDM pond liners
manufactured by VEVOR are single-ply. This ensures uniform
performance across the full thickness of the EPDM sheet, and
the chances of inter-ply blisters and delamination are zero. Inter-
ply blisters and delamination are quite common in conventional
waterproofing products such as bitumen and torch-on
membranes. Unlike the torch-on membrane, the EPDM pond
liner does not require to be applied with flames, torches, and
gases. Instead, the EPDM pond liner is used with a bonding
adhesive, making the installation easy and safe.
Advantage
1. Resistant to UV, Ozone, and air pollutants.
2. Wide range of temperature resistance from -40 °C to +160 °C.
3. Nearly millions of square meters of EPDM membrane have
been installed on rooftops globally. They are known to have a
service life beyond 30 years.
4. No torches or gas are required during installation.
5. Flame-free and heat-free installations.
6. It is an environmentally recyclable system.
7. Lightweight: around 1.25Kg/SQM.
8. Single product for various areas such as basements, roofs,