Use and Care Manual

4. After pasting, drill holes on the black lines at both ends of the long beam
positioning paper.
1) make sure the hole is punched on the beam.
2) There are 2 holes at both ends of each long beam positioning paper, a total of 4
holes.
3) Two holes at each end of the long beam positioning paper, one for each with the
red line as the center, and the spacing is about 20 inches.
09
5. Finally, all the holes are nished, install the ceiling bracket before installing the
column. When installing the column, align the left (right) edge of the column with
the red line and x it on the bracket.