Use and Care Manual

- 13 -
Note that this trigger can activate as long as you are in AUTO Mode,
even if you are viewing a different trigger within AUTO Mode.
TRIGGER MODE: HIGH HUMIDITY
In this mode, pressing the up or down button sets a high humidity trigger.
The fan will activate if the probe’s reading meets or exceeds this trigger.
It will gradually ramp up until it reaches the ON Mode’s setting. If the
probe’s reading falls below your trigger, the fan will turn off. We
recommend turning this trigger OFF when not in use during set up by
holding the up and down buttons together.
You may set this trigger below the low humidity trigger to create a range
where the fan is active.
Note that this trigger can activate as long as you are in AUTO Mode,
even if you are viewing a different trigger within AUTO Mode.