Use and Care Manual

- 6 -
Fig.1.
Before commencing assembly familiarize your self with all the assembly
components and dimensions (See chart and diagram in Fig.1.)
Installation method
1. The product shall be installed at least 3-5 meters above the ground for
ventilation
2. Make a hole on the wall with the size of A2xB2. (Refer to Fig.1. )
3. Punch four holes in the wall,You can choose four holes with the size of
Chart A3 or four holes with the size of B3; (Refer to Fig.1.)
4. Then install the four expansion bolt,You can choose to install indoors or
outdoors (Refer to Fig.2.)
5. Put the product on and lock it with nuts.
Fig.2.