Use and Care Manual

- 18 -
will not be able to switch modes or adjust settings. You will only be able to
put the controller in ECO display. Holding the LEAF button for three or
more seconds will unlock the controller.
ECO-MODE
To turn off the LCD display, press the LEAF button. While the screen is off,
all programs, settings, and alarms will run in the background. You can
activate ECO Mode while the controller is locked. To exit ECO mode,
press any button.
ALERT ICONS
The top left of the display shows the alert icons. Icons may flash when the
controller signals an alert to tell you a particular function or alarm is being
triggered.
DISPLAY LOCK ALERT
This icon is visible when the controller has been locked. The
icon will flash to alert you that the controller is locked if you try
to change the mode or settings.
HUMIDITY ALARM ALERT
This icon will flash when the high or low humidity alarm has
been triggered.
TEMPERATURE ALARM ALERT
This icon will flash when the high or low temperature alarm has
been triggered.