Use and Care Manual

- 16 -
Note that alarm triggers can only activate in AUTO, ON, or TIMER
Mode. Please leave ALARM SETTING to arm the controller.
ALARM SETTING: HIGH HUMIDITY
In this mode, pressing the up and down button sets a high humidity alarm.
The alarm will sound and its icon will flash if the probe’s reading exceeds
the set humidity.
To activate the alarm, leave the alarm mode. The alarm will turn OFF if the
probe’s reading falls below the trigger or if any button is pressed. You can
also set the alarm OFF by holding the up and down buttons together.
You may set this alarm below the low humidity trigger to create an
operating range.
Note that alarm triggers can only activate in AUTO, ON, or TIMER
Mode. Please leave ALARM SETTING to arm the controller.
ALARM SETTING: LOW HUMIDITY
In this mode, pressing the up and down button sets a low humidity alarm.
The alarm will sound and its icon will flash if the probe’s reading falls
below the set humidity.
To activate the alarm, leave the alarm mode. The alarm will turn OFF if the
probe’s reading rises above the trigger or if any button is pressed. You
can also set the alarm OFF by holding the up and down buttons together.
You may set this alarm above the high humidity trigger to create an
operating range.