Use and Care Manual

- 10 -
Displays the alerts and statuses from the controller, including the alarm
and the screen lock.
7.PROBE HUMIDITY
Displays the current humidity that the corded sensor probe is measuring.
Shows “- -” if no probe is plugged in.
8.FAN SPEED
Displays the current speed the fan is running at, or what speed it should
be running at if no fans are plugged in.
9.SETTING
Displays the value you set for the current mode. Pressing the up or down
button changes the value.
OPERATION DESCRIPTION
MODE SETTING
Pressing the Mode button will cycle through the controller’s available
programming modes and settings: ON Mode, OFF Mode, TIMER Mode,
AUTO Mode (4 triggers), ALARM Settings (4 settings).
ON MODE
In this mode, the fan will heat continuously regardless of temperature or
humidity. Use this mode to set the fan's maximum blowing strength,
ranging from 0-10, when triggers are activated.
OFF MODE
In this mode, the fan will not run regardless of temperature or humidity.
Pushing the up or down button will change the display’s brightness,
ranging in 1/2/3/A3. On setting A3, the display will dim its brightness down