Use and Care Manual

- 16 -
TO LIGHT WITH A MATCH
1.If burner will not light after several attempts using the control knob, the
burner may be lit with a match.
2.If you have already attempted to light the burner using the control knob,
wait 5 minutes for any gas to dissipate.
3 Insert a match into the matchstick holder, ignite the match and insert
through the oven opening to the burner.
4.Push and turn the control knob to HI slowly, the burner should ignite
immediately.
5.If the burner does not light within seconds, turn the control knob OFF
and wait 5 minutes and try again.
CARE AND MAINTENANCE
When storing GB-GO13A, avoid direct sunlight if possible and store
indoors for long-term storage. GB-GO13A should not be exposed to harsh
weather conditions such as snow, heavy rain and strong winds.
Wait for GB-GO13A to cool completely before moving
The outer shell of GB-GO13A may fade over time and through use. This
will not affect performance.
PIZZA STONE BOARD
1.DO NOT use the stone over an open flame.
2.Avoid extreme temperature change to the stone. DO NOT place frozen
foods on a hot stone.
3.The stone is fragile and can break if bumped or dropped.
4.The stone is very hot during use and stays hot for a long time after use.
5.DO NOT cool the stone with water when the stone is hot.
6.After cleaning the stone with water, please dry the stone before use.
This can be done in a conventional oven at 60°C (140°F) for 2 hours.
CHOICE OF FIREWOOD PELLETS