Use and Care Manual

- 7 -
8.How to install the handle ?
(The screws in the product manual have been installed on the product, so
that you can find the corresponding screws better.)
How to use the pizza oven
1. Use around 450-500g pellet in the carbon box.
2. Use flame gun to burn the pellet, around 2-3 mins, the pellet will be
burned.
3. If making a pizza, place the pizza stone inside and preheat for 15
minutes. Put the pizza in it, turn around after 60 seconds, and burn it for
another 90-120 seconds according to the thickness of the pizza.
4. Use beef function, Preheat 3 mins, prepare the food in the grid, Put the
food inside, base on different food to turn around it.
Replenishing the pellet
• During cooking, keep the pellet in hopper assembly at more than half the
capacity of the hopper assembly.
• To replenish the pellet during use, use the handle to open the hopper
assembly lid, then use the hopper shovel to take some pellets and pour
them into the hopper assembly. Place the hopper assembly lid back on
the hopper assembly with the handle.
• Make sure oven gloves or mitts are used.