Instructions / Assembly

1
、
Blades adjuster
A
：
(14mm)cores flat cables/wires feeding slots
B
：
Diameter 1-3.5mm cables/wires’ feeding hole
C
：
Diameter 3.5-5mm cables/wires’ feeding hole
D
：
Diameter 5-9mm cables/wires’ feeding hole
E
：
Diameter 9-13mm cables/wires’ feeding hole
Please note when using the machine:
Make sure the cables/wires’diameter are similar with the feeding
holes ,large cables/wires in large feeding holes,small cables/wires in small
feeding holes,flat cables/wires in flat feeding holes.
This product comes with the following items: manual
，
gloves and oil plug
Please raise the incoming line board
upward when stripping cables with
diameter of 6-13mm or hard wires,
Please adjust the incoming line board
downward when stripping cables with
diameter of 1-6mm or soft wires,