Thank you for purchasing our DONUTMACHINE for your home or business! With this high quality and easy to use appliance, you can enjoy your cookout with your families and friends or earn more profits for your business. *Please read the instructions carefully before using it. The manual contains four machine models: T-102 , T-102S，T-103，T-103S. SPECIFICATION (For the specific power of the machine, please refer to the power card of the machine) I.
refer to the power card of the machine) T-103 Model Voltage T-103S AC100~130V OR 200-240V/50-60Hz Power 3000 W Capacity 3050W 25 pcs/tank Donut’s shape 3 kinds Machine’s size 105*70*140CM II. ILLUSTRATIONS R=Reset switch T=Temperature control Y= Yellow indicator G= Green indicator S=Power switch H=Heating pipe III.
Assemble illustrations: Step 1: Assemble transmit bar, the longest one and H-type one. Then screw H-type bar according to the height you want. Step2: Put the longest bar into the two holes beside the cabinet, and screw the bar. Step3: Assemble the L-type bar.
Step4: Assemble the control head. Step5: Put the mold into the funnel, and assemble them to control head. Then screw the mold’s top and the funnel’s bottom. Step6: Speed regulation motor assembly(T-102S,T-103S). Then assemble the cooling plate according to your need.
IV. IMPORTANT SAFEGUARDS A. Make sure that your power supply matches with the power that marked on the product. The deviation is under 10%. B. DO NOT Handle roughly or drop on hard surfaces. C. DO NOT Mix with other utensils in the sink when washing. D. DO NOT Allow to rust. Always wash parts thoroughly. Dry completely and then lubricate with mineral oil or liquid shortening before storing or reinstalling in unit. E. DO NOT Force the machine if it becomes jammed.
When oil’s temperature is too high ( over 200℃ ), to protect the machine, the electricity of the machine will be cut automatically. But you can reset the machine vie press the reset switch ( R ) which is on machine’s backside after the oil ‘s temperature is a bit down . ! To get a healthy diet, please notice the frying time. ********************************************************** During making the donut, you can rotate the screw to adjust the weight of the dough in 3 degrees.
!Do not use strong alkali cleaners such as lye, soda ash, or trisodium phosphate, these will discolor or even corrode the equipment. Wipe the appliance with soft cloth .Never with abrasive products. 5. Dry each part of the machine when it is not used. And place it in a dry condition.
