Use and Care Manual
3
>SAFETY CAUTION<
To prevent the water and other conductive liquids flow into the machine;
When there is no mix or water in the freezing cylinder, the machine is not allowed to work,
failure to follow this instruction may damage the beater.
When the machine is working, no stick or something like that put into the air grid or the
dispenser door spout.
Carrying or moving the machine, the maximum tilt angle is 45°.
The machine is applying to use indoor, keeping the inside working environment good
ventilation and heat dissipation. Keep dry and clean. Avoid the heat source, direct sunlight
and the place where water splashing. The distance between the air grid and the wall or some
similar barrier should be over 50cm.
The machine should be operated by the professional or the trained staff.
To ensure the personal security, please keep ground connection.
If the power wire is damaged, to avoid the danger, please contact the manufacture or
serviceman of the Maintenance department.
To ensure the using voltage power is same as the nameplate on the machine and the working
voltage is ranging from the ±10% of the rated voltage.
If the power wire is damaged to avoid the danger, please contact the manufacture or
serviceman of the Maintenance.
If the machine needs to be repaired, please contact the manufacturer or serviceman of the