Instructions / Assembly

A2
Inverter (0.75-30kW)
Pn 09
Pn 10
Pn 11
Deceleration time with range：
000.01S
－
650.00S
Decelerate time (from Pn10 to 0Hz).
Maximum runtime frequency with range：000.10Hz－400.00Hz
Maximum output frequency by inverter.
Minimum runtime frequency with range：000.10Hz－400.00Hz
If the frequency from command below this value, inverter
will stop. It wouldn’t recover until command frequency up
this value.
Pn 12
Pn 13
Pn14
Motor rating frequency with range：
010.00Hz
－
400.00Hz
It is used for modify the V/Fcurve.
Torque compensation with range：0.0—4.0
Large parameter may cause damage to the motor.
Torque compensation frequency：0.01Hz—400.00.00Hz
Inverter doesn’t provide torque compensation if runtime
frequency is larger than this value.
1
3