Technical data

48
Fuel system
Drain the water from the water separator/
fuel filter and the fuel tank. Ensure that the
tank is completely filled with fuel.
Running with protective fuel mix-
ture
Connect the fuel supply pipe to a can filled
with a mixture of one (1) part of engine oil*
to nine (9) parts of clean fuel**. Use this
mixture to run the engine at no load for
approx. 10 minutes.
Stop the engine.
* Engine oil with protective properties.
E.g. Shell Super Diesel T 10W40
** Preferably water-free fuel.
Collect some fuel from the return pipe,
while engine is running.
Never run the engine under
load with this mixture of fuel
and oil.
Winter storage procedure
Winter lay-up
VD01006 VD00136