Technical data

12
9.0112
Battery charger type BC1216, BC1225, BC1235, BC2416, BC2425, BC2450, BC2465
ENGLISH
7 Technical data
Mains voltage : 230 V ( ± 10%, 47 - 63 Hz
Output voltage : see machine plate
Output current : see machine plate
Charging program : see section 10 of operating
instructions
Temperature range : 0 - 40°C
Protective system : IP 21
Length of power cable : 1900 mm
Dimensions (w x h x d) / Weight
BC1216 / BC2416 : 28 x 18 x 8 cm / 3.5 kg
BC1225 / BC2425 : 28 x 18 x 8 cm / 3.5 kg
BC1235 : 28 x 18 x 8 cm / 5.5 kg
BC2450 : 34 x 22 x 110 cm / 7.5 kg
BC2465 : 39 x 22 x 11 cm / 8.5 kg
The units comply with the following regulations:
EN 60335-2-29 Safety
EN 55014-1 EMV
EN 55014-2 EMV
EN 61000-4-4 EMV
EN 50 082-2 Noise immunity for industrial use
EN 50 081-1 Noise output for residential, business,
industrial areas
and small workshops
EN 60 146 part 1-1 Semiconductors, current rectifiers
IEC 68-2-6 Shock and vibration (only applicable for
on-board-version)
IEC 68-2-29 Shock and vibration (only applicable for
on-board-version)
We reserve the right to make changes as required.
1 Wet battery (100 % In) 2 Dryflex GiV/PzV (100 % In) 3 Supra F GiV (100 % In) 4 Dryfit-GiV Batterie (100 % In) 5 Dryfit PzV Batterie (100 % In) 6 Champion (100 % In) 7 WUoU (100 % In) 9 Wet battery (80 % In) 10 Dryflex GiV/PzV (80 % In) 11 Supra F GiV (80 % In) 12 Dryfit-GiV Batterie (80 % In) 13 Dryfit PzV Batterie (80 % In) 14 Champion (80 % In) 15 WUoU (80 % In)
‘yellow’ / charging ⊗−⊗−⊗−⊗⊗−⊗−⊗−⊗
‘green’ / charged −⊗⊗− −⊗⊗−⊗⊗− −⊗⊗
‘red’ / failure − − − ⊗⊗⊗⊗ − − − ⊗⊗⊗⊗
‘yellow’ / maintenace free −−−−−−−⊗⊗⊗⊗⊗⊗⊗
LED
Charging program / Battery type
9 Disposal
When disposing of the Charger TEBECHOP Traction , always
observe the local regulations.
Note!
The Charger contains electrolytic condensors and
semiconductor components. The Charger should be
disposed of in such a way that no environmental dam-
age is caused.
The packaging material used for the Charger must be
separated before disposal. Paper, cardboard and plas-
tic materials should be recycled.
10 Charging programs
Table 3 indicates for which charging program your Charger
TEBECHOP Traction is set. The charging program is indicated
automatically for 10 secs. by flashing diodes at the start of the
charging process.
You can find the number of the adjusted charging program on
a label near the machine plate.

Table 3: Charging programs
Symbols: ‘
⊗‘ - LED flashes
‘
−’ - LED off