Product Manual B

WARNING!
Read all the instructions and warnings first before attempting to operate this lifting crane.
1. Do not operate the hydraulic pump beyond rated capacity. Do not exceed winch load weight capacity.
2. Avoid any moving parts while using this lifting crane, keep fingers and hands away from moving parts.
3. Be certain the crane is properly bolted to a truck bed that can hold the load.
4. Never come between the crane and the load when operating.
5. Never fully extend cable while pulling a load, keep 4 complete turns of cable around the winch module.
6. Nevr operate winch if cable shows any signs of weakening, is knotted or kinked.
7. Never fully exlend the cable winch under load.
8. Don’t overreach. Keep proper footing and balance at all times.
9. Never lift people or hoist loads over people.
10. Always set parking brake and block tires when using this truck lift. Vehicles with automatic transmitsions
should be left in “park”. Manual transmissions should be left in gear. Never attempt to lift something while
the vehicle is moving.
11. Stay Alert. Watch what you are doing. Use comm.on sense. Do not operate any tool when you are tired.
Ref No. Description QTY Ref No. Description QTY Ref No. Description QTY
1 Winch Assembly 1 16 Small Pulley 1 31 Grease Fitting 1
2 Winch Wire 1 17 Bearing 1 32 Base 1
3 Bushing 1 18 Wire Clamp 2 33 Bakelite Nut 1
4 Large Pulley 1 19 Hook Subassembly 1 34 Binding Bolt 1
5 Post Weldment 1 20 Hook with Bolt 1 35 Handle 1
6 Nut M14 1 21 Bolt M16x80 1 36 Handle Cover 1
7
Lock Washer φ14
1 22 Nut M16 3 37 Bolt M10x20 3
8
Flat Washer φ14
1 23
Lock Washer φ16
3 38
Lock Washer φ10
3
9 Boom 1 24
Flat Washer φ16
3 39
Flat Washer φ10
3
10 Bolt M14x100 1 25 3T Jack 1 40 R pin 1
11 Boom Extension 1 26 Bolt M16x90 1 41 Bearing 1
12 Bolt M12x85 1 27 Bolt M12x40 6 42 Bolt M16x110 1
13 Nut M12 7 28 Turntable 1 43 Bearing 1
14
Lock Washer φ12
7 29
Bearing φ40
1 44 3T Jack Handle 1
15
Flat Washer φ12
7 30 Bearing Sleeve 1