Product Manual

SR-SS HORIZONTAL MATERIAL RACK

Assembly Instructions

9/25/2007

PARTS DESCRIPTION

Upright - 4 pcs.

Floor mounts - 2 pcs.

Cross bars - 4 pcs.

Arms - 36 3/4" long (2 pcs.), 33 3/4" long (2 pcs.), 32 3/8" long (2 pcs.), 28 1/4" long ( 2 pcs.), 25 1/4" long (2pcs.),

22 3/4" long (2 pcs.), 19 3/4" long (2 pcs.).

Hardware kit - M10-1.5x60mm long bolt (6 pcs.), M10-1.5 nylock nut (6 pcs.), M6-1.00x35mm long screw (2 pcs.),

M6-1.00x20mm long bolt (8 pcs.), M6-1.00 nylock nut (10 pcs.), Yellow end caps (28 pcs.)

Floor mounts

Uprights

Fig.1

Arms Hardware kit

Fig.2

PAGE 1
SR-SS HORIZONTAL MATERIAL RACK Assembly Instructions 9/25/2007 PARTS DESCRIPTION Upright - 4 pcs. Floor mounts - 2 pcs. Cross bars - 4 pcs. Arms - 36 3/4" long (2 pcs.), 33 3/4" long (2 pcs.), 32 3/8" long (2 pcs.), 28 1/4" long ( 2 pcs.), 25 1/4" long (2pcs.), 22 3/4" long (2 pcs.), 19 3/4" long (2 pcs.). Hardware kit - M10-1.5x60mm long bolt (6 pcs.), M10-1.5 nylock nut (6 pcs.), M6-1.00x35mm long screw (2 pcs.), M6-1.00x20mm long bolt (8 pcs.), M6-1.00 nylock nut (10 pcs.), Yellow end caps (28 pcs.
PAGE 2
STEP 1: Fig.3 Use 3 M10x1.5x60mm long bolts and 3 M10x1.5 lock nuts to bolt one side of upright at the base and top. Fig.
PAGE 3
STEP 2: Use 8 M6-1.00x20mm long bolst, & 8 M6-1.00 lock nuts to secure 4 cross bars Fig.5 STEP 3: Use 2 M6x1.00x35mm long screws, & 2 M6-1.00 lock nuts to secure center of cross bars on both sides. Fig.
PAGE 4
Fig.7 STEP 4: Insert load arms in the uprights as shown below in Fig. 8 & 9, and install end caps Fig.8 VESTIL MANUFACTURING CORP. WWW.VESTIL.