Product Manual

7
Accumulation
● The Accumulation function is used to add multiple weights and total them together
● In weighing mode load the rst weight, once stable press the TOTAL key to enter
the Accumulation mode. The screen will show “
n001
” followed by the weight.
● Remove the weight so scale reads 0 before adding the second weight to the scale
● Once the second weight is stable press TOTAL key to add the weight to the Accumulat-
ed total,
the screen will show “
n002
” followed by the weight.
● Repeat previous steps until all desired weights have been added to the total (max 999
times)
● When you are done and want to display the Accumulated total, press the TOTAL and
SET key together. The Accumulated number “
n
###” (the number of weights you
are adding together) will ash on the display followed by the total
● The total will display by ashing between 2 sets of numbers
● There are 8 digits in total, the display will ash 4 at a time, the rst 4 on the left and
the last 4 on the right. For example if the rst 4 digits are “0012” and the last 4 digits
are “3456” the actual weight is 001234.56 or 1234.56 lbs/kg
● If you want to print the Accumulated total, hold the SET key for one second while
the last 4 digits of the total are shown
● To exit Accumulation mode, wait for the last 4 digits to the right of the screen to
appear, and then press and hold the TOTAL key for one second
● “
CLr n
” will be displayed, asking you if you want to keep the data?
● If NO you do not want to clear the Accumulated total, then keep “
CLr n
”.
● If YES you do want to clear the Accumulated total, then use the arrow key to
change to “
CLr y
”.
● Finally, press the SET key to select exit Accumulation mode