Product Manual

5
DISPLAY AND KEY DESCRIPTION
ON/OFF Powers the Indicator On or Off if held for 3 seconds
TOTAL 1. Accumulates weights
2. Works with SET key to perform the Accumulation function and check
the Accumulation result
UNIT Shifts between weighing units, KG and LB
ZERO 1. Zero’s the scale within zero range
2. Tare’s the weight if its over the zero range
SET 1. Long Press to print the weight
2. Combined with ON/OFF to enter into calibration
3. Combined with the TOTAL key to check the Accumulative sum
lb The weight is shown in pounds
kg The weight is shown in kilograms
hold Shows you are in Hold mode
Gross Shows you are in Gross weight mode (includes tare); default mode
Net Shows you are in Net weight mode (weight without tared weight)
Tare Display’s tare satus
The scale is stable
The scale is at zero
Hi Flashes when weight is higher than set alarm parameter
Low Flashes when weight is lower than set alarm parameter
Ok Flashes when weight is within the set alarm parameters
Arrow keys
Return/Enter
Power
Back