Product Manual

Hold

To use the hold feature press the SET and ZERO keys at the same time. Press both again

to release the hold.

There are 4 different hold functions you can choose from in the C11 parameter

1. Peak Hold: Grabs the highest weight

(for materials testing, ie. tension and pulling

force)

● Press the HOLD key then add weight to the scale

● The indicator will show the highest weight it recorded and hold it on the screen until

a higher weight is placed on the scale

2. Manual Hold: Grabs the current weight and holds it so it will not change/uctuate

● While weighing, press HOLD and the indicator will hold the current weight on the

screen until HOLD is pressed again

3. Auto Hold: If the weight on the scale is above 20d (20 x division) and is stable,

the indicator will hold that weight on the screen for 3 seconds then go back to general

weighing

● Pressing the hold key is unnecessary, holding is done automatically when the scale

is stable

4. Average Hold: Used for animal weighing, the indicator will display the average

weight sampled from 3 seconds

● Add livestock to scale and press HOLD

● Indicator screen will show “

LOC

” for 3 seconds, then display the average weight

from those 3 seconds

● Press HOLD again to exit holding mode

● If your pallet jack has a printer and the weight on the scale is stable press the SET key