Product Manual

ManualsBrandsVestil ManualsDrum Handling EquipmentPail Lid Closing Press Machine — 5-Gallon Capacity

rev. 7/11/2016 PLC-P-FM, MANUAL.doc

PLC-P-FM Manual Pail Lid Closing Press

Instruction Manual

After delivery, immediately remove the packaging from the product in a manner that preserves the

packaging and maintains the orientation of the product in the packaging; then inspect the product closely to

determine whether it sustained damage during transport. If damage is discovered during the inspection,

immediately record a complete description of the damage on the bill of lading. If the product is undamaged,

discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the

product is used is exclusively the responsibility of the owner/end-user.

2) Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply

either: a) the instructions in this manual; or b) information provided on labels affixed to the product.

Vestil is not responsible for any consequential damages sustained as a result of failing to exercise sound

judgment while assembling, installing, using or maintaining this product.

Vestil Manufacturing Co.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail: sales@vestil.com

Table of Contents

Product specifications………………………………………..…………………………………………………………….. 2

Signal words….……………………………………………………………………………………………………………… 3

Safe use recommendations………………………………………………………………………..……………………….. 3

FIG. 1A: PLC-P-FM exploded parts diagram and bill of materials……………………………………………………… 4

FIG. 1B: Adjust pail stops……………………………………….................................................................................. 4

Height adjustment……………………………………………………………………………………………………………. 5

FIG. 2: Height adjustment diagram………………………………………………………………………………………… 5

Use instructions……………………………………………………………………………………………………………… 5

FIG. 3: Center pail beneath platen………………………………………………………………………………………… 5

FIG. 4: Adjust burper plunger assembly…………………………………………………………………………………… 5

Inspections & Maintenance………………………………………………………………………………………………… 6

Label placement diagram……...………………………………………………………………………………………….. 6

Limited warranty…...……………………………………………………………………………………………………….. 7

Summary of content (7 pages)

PAGE 1
rev. 7/11/2016 PLC-P-FM, MANUAL.doc Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.
PAGE 2
rev. 7/11/2016 PLC-P-FM, MANUAL.doc Product specifications: Dimensions and other product specifications of standard wrapping machine models appear in the following diagrams and table: 963/16 in. 643/4 in. 16 in. 297/8 in. 34 in. 3613/16 in. Model PLC-P-FM A: Overall width B: Platform width C: Overall length D: Platform length E: Overall height 297/8in. 16in. 3613/16in. 16in. 963/16in. Capacity Net weight 250 lb. 250.7 lb.
PAGE 3
rev. 7/11/2016 PLC-P-FM, MANUAL.doc Signal words: This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to uses of the product likely cause property damage. The signal words used appear below along with the meaning of each word: Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.
PAGE 4
rev. 7/11/2016 PLC-P-FM, MANUAL.doc FIG. 1A: PLC-P-FM Exploded Parts Diagram & Bill of Materials FIG. 1B: Adjust pail stops Handle Platen (17) Pail stop (14) Nut plate bracket (15) Item no. 1 2 3 4 5 Part no. Description 40-514-072 40-514-071 40-542-001 40-514-070 40-541-002 Weldment, frame, press head Weldment, frame, arbor plunger Weldment, lever Weldment, floor frame Subassembly, piston plunger 1 1 1 1 1 Item no.
PAGE 5
rev. 7/11/2016 PLC-P-FM, MANUAL.doc Height adjustment procedure: Before putting the lid closer into regular service, determine whether the height of the pail support is optimal and adjust it if necessary. Features discussed in the following steps are identified in FIG. 2. 3 3 1. Loosen the four /8in. square nuts (item no. 25) and /8in. bolts (item no. 21) that clamp the pail support to the upright frame. 3 To loosen the connections, use a /8in. wrench to turn the bolt heads counterclockwise.
PAGE 6
rev. 7/11/2016 PLC-P-FM, MANUAL.doc Inspections & Maintenance: DO NOT use the pail closer unless it is in normal operating condition. Correct all issues discovered during an inspection before returning the unit to service. Before each use, inspect the listed components. Numbers in parentheses correspond to item numbers in the exploded parts diagram on p. 4. 1.
PAGE 7
rev. 7/11/2016 PLC-P-FM, MANUAL.doc LIMITED WARRANTY Vestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.