Full Product Manual

Table of Contents Rev. 11/11/2021 PLC-P-FM, MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Corp. 3 of 7
SIGNAL WORDS
This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to
uses of the product likely cause property damage. The following are signal words used in this manual and their
definitions.
SAFETY INSTRUCTIONS
Vestil strives to identify all hazards associated with the use of our products. However, material handling
is dangerous and
no manual can address every risk. The most effective means for preventing accidents is
for the end-user to exercise
common sense and sound judgment whenever using this product.
Risks of serious personal injuries.
• Read & understand the entire manual before assembling, installing, using or servicing the
product.
• DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil.
Unapproved modifications automatically void the Limited Warranty and might make the product unsafe.
• Read the manual periodically to refresh your understanding of proper use and maintenance procedures.
• DO NOT exceed the 250 pound capacity. See Label 287 in Labeling diagram on p. 6.
• Anchor the unit to the ground or lock the casters BEFORE using it.
• Keep clear of the platen and pinch points while using the pail closer.
• Center pails beneath the press platen before applying a lid.
• Be sure that the burper plug (item no. 10 in the Exploded View p. 4) contacts the top of each lid before
the platen. Adjust the plug according to the Plunger adjustment instructions provided on p. 5.
• Adjust the elevation of the pail support to a comfortable height following Pail height adjustment
instructions on p. 5.
• DO NOT use the pail closer if you observe abnormal motion or hear unusual noises. Immediately tag the
unit “Out of service”. Restore it to normal condition (see Record of Normal Condition below) before
returning it to service.
• DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and
certain that it will be safe to use afterwards.
• DO NOT use this device UNLESS all product labels as shown in the Labeling Diagram on p. 6 are
readable and undamaged.
Proper use, maintenance, and storage are essential for this product to function properly.
o Periodically lubricate pivot points.
o Keep the product clean & dry.
o Vestil uses only quality parts to make the equipment we manufacture. Vestil bears no responsibility for
problems that result as a consequence of using unapproved replacement parts. Contact Vestil to order
approved replacement/spare parts for this equipment.
RECORD OF NORMAL CONDITION
Before using the closer for the first time, create a written record of its appearance and functions. Include
detailed descriptions of the frame, pail support, platen, press head weldment, handle, and plunger. Include
observations about how much force is required to attach a lid to a pail. Include sounds heard as the handle
moves up and down. Thoroughly photograph the unit and all labels. Add the photographs to the record. This
record establishes “normal condition”. When conducting future inspections, compare your observations with
the record to determine if a component is in normal condition or requires repair or replacement.
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. This signal word is limited to the most extreme situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
!
!
!