Product Manual

Rev. 12/11/2014 LM-HP, MANUAL.doc
Copyright 2014 Vestil Manufacturing Corp. Page 1 of 4
LM-HP-SERIES LOAD HOOK FORK ATTACHMENTS
I
NSTRUCTION MANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the carpet pole in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered during the inspection,
immediately record a complete description of the damage on the bill of lading. If the product is
undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on labels affixed to the product.
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: [phone] -or- Toll Free [phone]
Fax: [phone]
www.vestilmfg.com e-mail: [e-mail]
Table of Contents:
Hazard Identification: Explanation of Signal Words….……………………………………………………………..……………… 2
Safety Recommendations………………………………………………………………..…………………………..…….………… 2
Label Placement Diagram……...……………………………………………………………………………………………..……… 2
FIG. 1: LM-HP parts diagram, dimensions, and bill of materials …………………………………………………..……………. 3
Installation instructions…………………………………………………………………………………………………………..……. 3
Use instructions………………………………………………….……………………………………………….…………….. ......... 3
Inspections…………………………………………………………………………………………………………………………..3 - 4
Maintenance……………………………………………………………………………………………………………………..…….. 4
Limited Warranty…...…………………………………………………………………………………………………………..……… 4