Brochure

CUSTOMER INFORMATION
CONTACT:
COMPANY:
PHONE:
EMAIL:
CONTAINER TYPE & SIZE
HDD WORKS WITH STANDARD 55- AND 30-GALLON PLASTIC, STEEL,
AND FIBER DRUMS. IF YOU WOULD LIKE TO DUMP A DIFFERENT
CONTAINER, PLEASE SPECIFY SIZE:
LENGTH: WIDTH:
HEIGHT: DIAMETER:
IF YOU PLAN TO USE A DOLLY WITH YOUR DRUMS,
PLEASE SPECIFY OVERALL SIZE OF DOLLY:
LENGTH: WIDTH:
HEIGHT: DIAMETER:
OPTIONS (LIST ALL THAT APPLY)
SPECIAL CHUTE REACH (STD. 14”)
SPECIAL DUMP HEIGHT:
SPECIAL CAPACITY:
SPECIAL HOLD DOWN FINGER HEIGHT:
SPECIAL COLOR:
STAINLESS STEEL CHUTE***:
FDA WHITE POWDER COAT FRAME:
“STEEL IT” PAINT FRAME:
5-GALLON PAIL ADAPTOR FINGERS:
*** 304 SS MILL FINISH STANDARD. PLEASE SPECIFY IF A DIFFERENT FINISH IS REQUIRED.
POWER (150V, 1 PHASE STANDARD) IF CUSTOM, INDICATE BELOW
_____ A/C: _____ 110V _____ 220V _____ 460V _____ OTHER _____ SINGLE PHASE _____ THREE PHASE
_____ 12V D/C (115V ON-BOARD BATTERY CHARGER INCLUDED)
_____ ROTARY AIR / HYDRAULIC (80 CFM @ 80 PSI, 1/2 GPM) _____ RECIPROCATING AIR / HYDRAULIC (15 CFM @ 100 PSI, 1/4 GPM)
CONTROLS: _____ HAND _____ FOOT _____ AUTOMATED
POWER UNIT: _____ EXTERNAL _____ INTERNAL (STANDARD)
IF EXTERNAL, LENGTH OF CORDS (8’ STD):
IF ANY OTHER SPECIAL POWER OR
CONTROLS ARE REQUIRED, PLEASE INDICATE:
APPLICATION INFORMATION
DUTY CYCLE: STARTS PER HOUR: HOURS PER SHIFT:
SHIFTS PER DAY: DAYS PER WEEK:
DUTY CYCLE IS CALCULATED BY STARTS PER HOUR OR NUMBER OF TIMES “UP” BUTTON IS PUSHED. JOGGING (BOUNCING OF CHUTE) IS NOT RECOMMENDED.
ANTICIPATED CYCLE TIME:
SPECIAL TEMPERATURE REQUIREMENTS:
ARE THERE OVERHEAD HEIGHT RESTRICTIONS?
IS THIS A HAZARDOUS LOCATION? IF YES: CLASS: _______ DIV: _______ GROUP: ________
OTHER SPECIAL REQUESTS OR APPLICATION INFORMATION:
HDD DRUM DUMPER
SURVEY SHEET
STANDARD FEATURES
DESCRIPTION (CIRCLE ONE): PORTABLE STATIONARY
DUMP HEIGHT (CIRCLE ONE): 36” 48” 60” 72”
CAPACITY (CIRCLE ONE): 750 LBS. 1,000 LBS. 1,500 LBS
09-126-001
VESTIL
MANUFACTURING
2999 N. WAYNE ST.
ANGOLA, IN 46703
Ph: 260-665-7586
Fax: [phone]
www.vestil.com
[e-mail]
Is this a repeat quote or repeat order? If yes, please idicate
Prev. Quote No.: ____________ Prev. Order No.:____________