Product Manual

Rev. 0213 EPT, Manual.doc

Step 6: Disconnect the FRC from the mounting plate. The FRC mounts on the plate with 2 Phillip’s head bolts

and 5/16 inch nuts. After the bolts are unfastened, remove the FRC.

5/16 inch

nuts

Step 7: The FRC may not need to be replaced if the malfunction results from mechanical binding of some of the

moving parts. To apply lubricant, remove the plastic caps shown below (identified with arrows) with a flat-

blade screwdriver.

Side View

Remove

plastic caps

Apply lubricant

Step 8: Install the replacement FRC by performing Steps 1 through 7 in reverse order. Similarly, if you simply

lubricated the original FRC, perform steps 1, 2, 3, 6 and 7 in reverse order.