Product Manual

Rev. 0213 EPT, Manual.doc

Step 3: Use 10mm wrenches (or adjustable wrenches) to disconnect

the horn from the mounting plate.

Step 4: Disconnect cables B, A, F,

and C from the FRC, using either a

9/16 inch crescent wrench (or

socket) or a 14mm wrench.

[Photograph below shows

disconnection of A & F cables.]

Step 4: Disconnect cables I and G from the terminal on the top side of the FRC.

Close-up side view of the terminal on

top of the FRC.

I G

Step 5: Disconnect the spade terminals (locations shown in photograph below).

Red & Black wire Orange wire

Orange wire Green & Black wire