Product Manual B

Rev. 0213 EPT, Manual.doc
Copyright 2013 Vestil Manufacturing Corp. Page 48 of 51
Quencharc installed on pump solenoid.
Step 3
: Reinstall the yellow cover and reinstall the screws.
Step 2
: Disconnect the wires from the horn and the pump solenoid; then plug the horn and pump solenoid wires into
to the quencharcs’ piggy back terminals. plug the piggy back terminals into the horn and pump solenoid as shown in
the following pictures. Quencharc shown on horn (photo 4)
4
5
3
Add one to the
pump solenoid
A
dd one to the horn