Product Manual

O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
3.1 TO RAISE AND LOWER There are two buttons located on the right side of the handle. One is for raising the
hook. The other one is for lowering the hook. Make sure that there is no one standing near the truck or the
load when raising or lowering.
3.2 TO TRAVEL The butterfly switch controls the direction and speed of the lift truck. Rotate the butterfly controls
located on the upper part of the handle. Rotate the butterfly control CW towards the forks, the truck towards
in the forks first direction. The speed of the truck is controlled by the degree of rotation in either direction.
3.3 TO BRAKE This truck is equipped with a brake that is applied between 10~15 degrees of the vertical position
and between 85~90 degrees of the lower position in the vertical operating of the handle. The brake can be
operated at any point in the lateral operating of the handle. When you release your hand from the handle, it
will resume the neutral position automatically, as the brake in work. Always make sure that the brake is in
work before operating the truck. When packed, always put the handle in the full vertical position with the
brake applied and forks lowered.
3.4 DIRECTIONAL REVERSING SAFETY BUTTON At the top of the handle, red reversing button that is
designed to protect the operator from injury. If the top of the handle comes in touch with the operator’s body
during operation, the truck will automatically reverse direction and travel away from the operator. Then
immediately release your hands off the butterfly control and put the handle up and brake on. The safety
reversing button is spring-loaded, so it automatically resumes its original position after being activated.
3.5 HORN A horn is located on the front side of the handle.
3.6 KEY LOCK Before operating the truck, turn on the electric power first. The key lock is located on the battery
pack cover.