Technical data

6
GB
The door can be changed from right-hinged to left-hinged and vice versa as follows:
Changeofhingeside-W32.
1. Rubber plug 2. Screw 3. Hinge cover 4. Screw 5. Top hinge 6. Door
7. Bottom, right 8. Screw 9. Cabinet foot, low 10 Cabinet foot, high
● Ensure that the cabinet is not connected
to the mains
● Remove the rubber plugs (1). See g. 5.1
● Remove the screws (2) and take off the
hinge cover (3)
● Remove the 3 screws (4) which hold the
top hinge and lift off the top hinge (5)
SUPPORT THE DOOR! See g. 5.2
● Lift off the door (6) and place the cabinet
on the back
● Remove the 3 screws (8) which hold the
bottom hinge (7) and dismount the low
cabinet foot (9) from the hinge. See g.
5.3
● Dismount the high cabinet foot (10) from
the cabinet and remount it on the op-
posite side
● Move the bottom hinge enclosed to the
left side and mount the low cabinet foot in
this one
● Mount the bottom hinge in the left side
using the 3 screws (8)
● Mount the door on the bottom hinge
● Mount the top hinge, hinge cover, and
rubber plugs. See g. 5.4.
● Mount the door handle on the opposite
side
● Lift up the cabinet again and wait 1 hour
before connecting to the mains to avoid
oil in the cooling system
Abb. 5.3
Abb. 5.4
GB
Abb. 5.1 Abb. 5.2