Technical data

5
GB
Gettoknowyourwinecooler.
Installation
The surface on which the appliance is to be
placed must be level. Do not use a frame
or similar. It is important that the appliance
be absolutely level. It can be levelled by
screwing the adjustable feet at the front of
the appliance up or down (g. 2).
Use a spirit level to check that the appliance
is absolutely level sideways.
Build-in
W32 is only for free-standing, and suf-
cient free air around the appliance must be
ensured. (g. 4)
The appliances W45andW38 can be
installed as built-in units in kitchen elements
or be placed free-standing (g. 3).
At built-in condition ensure sufcient airow
through the kitchen base in front of the
appliance. The total cross section of the
opening must be as described in g. 3, and
individual air duct clearance must be at
least 5 mm.
Along with your new cabinet is a replace-
able kick plate which can be xed with the
two screws. These two screws are located
in the accessories bag, see gure 2_1
g. 2_1
g. 2
g. 3
g. 4
g. 3
g. 4
If needed there is a kit in the accessories
bag, see gure 2_1, for xing the cabinet up
against a table top.
g. 2