Operation Manual

36
6. CHAPTER:
Power Management
In this section, we will describe how you may use your power settings in most effective way. Please
read carefully the power management instructions below. This will ensure security and best
performance of your system.
Following titles are covered under this section:
Power management
Critical points for power saving
You can adjust your power options in Power Management under Control Panel of Windows operating
system:
Result
Situation
Shutting down the hard disk
In case your system is unused for a given period
Turning off the screen
In case your system is unused for a given period
During hibernate mode: hard
disk, screen and temporary
memory (ram) voltage will be
turned off for energy saving
In case your system is unused for a given
period Press the power button
During sleep mode: both hard
disk and screen will be shut
down
In case your system is unused for a given
period Press the power button
Note: For more information about power management configuration, please refer to the
relevant operating systems support pages.
Critical points for power saving
You may do the following to provide some additional power saving apart from your "INTERACTIVE
BOARD" automatic power saving:
Enabling power management
Decreasing the screen brightness as far as possible
Turning off the "INTERACTIVE BOARD" when it is not used