Operation Manual

9
The vent holes of the product
The vent holes on "INTERACTIVE BOARD" provides the product to work effectively by preventing
overheat. Do not block these openings in anyway.
Important!
 Do not put any objects in the vent holes of your product. To put any objects in the vent holes of the
product may cause fire or short circuit of the inner parts of your product.
Heat & Fire
Do not put your "INTERACTIVE BOARD" product near fire or any kinds of high temperature source
like heaters.
Lightening
In order to prevent a potential electrical shock, remove your products power cords during lightning.
Repair
Unless a basic implementation on the product is specified by the producers’ technical department on a
document, do not repair your "INTERACTIVE BOARD" by yourself. Otherwise, your guarantee may
get suspended and you may risk your health or your product. In case of need, consult your authorized
service.
Do not shake the "INTERACTIVE BOARD". Ensure that it stays in a balanced stance on its
position.
Do not throw or drop any object on your "INTERACTIVE BOARD" product.
Do not interfere on your products screen or any other surface with a sharp object.
Do not keep your “"INTERACTIVE BOARD" product in a humid environment.
Do not keep your "INTERACTIVE BOARD" product in an extremely cold environment.
Do not keep your "INTERACTIVE BOARD" product in an extremely hot environment.
Important!
There should be an easily accessible network plug near the product.