84" Interactive Flat Panel Display USER MANUAL
Content Important Security Information ............................................................................................................ 5 System Features .................................................................................................................................. 6 Introduction ........................................................................................................................................... 7 Marks Used in That Manual ................................
6.CHAPTER........................................................................................................................................ 32 SYSTEM BIOS INFORMATION USING BIOS ACTIVELY......................................................... 32 MAIN MENU ................................................................................................................................... 33 Antropi Teach Installation (Optional) ............................................................................
NOTE Depending on the model you buy, the "INTERACTIVE BOARD" may not be the same with the images in that manual. Warning This is a class A. In a domestic environment this may cause radio interference in which case the user may be required to take adequate measures.
Important Security Information 1. Please read this manual carefully before using the "INTERACTIVE BOARD". 2. Please keep that manual for further use. 3. Unplug your product before starting to clean. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If that does not help, please use LCD display cleansers. 4. To prevent breakdown, do not use non-advised accessories. 5. When unplugging the appliance, always pull directly on the plug.
NOTE: Depending on the products model you have bought, the appearance of your "INTERACTIVE BOARD" may not be the same with the one displayed in this manual.
Introduction This instruction manual is intended to help you operate your "INTERACTIVE BOARD" product in a proper way and get a better performance. Chapter 1. Meeting "INTERACTIVE BOARD" Chapter 2. Using "INTERACTIVE BOARD". Instructions for using the product and its functions Chapter 3. Usage of the Touch Screen Chapter 4. Connecting other equipment to "INTERACTIVE BOARD" and sound Chapter 5. Usage of Starboard Software (Optional) Chapter 6. Power of the "INTERACTIVE BOARD" Chapter 7.
Marks Used in That Manual Some words and phrases are written in a different format to get your attention. Note: It is used to emphasize the useful information and critical points about the product. Important! Important instructions are to be read carefully in order to prevent any damage to yourself, stored data and computer parts. Safety Precautions Please read the recommended safety precautions carefully for your safety. Warning! Unplug the system when you will not use for a long time.
The vent holes of the product The vent holes on "INTERACTIVE BOARD" provides the product to work effectively by preventing overheat. Do not block these openings in anyway. Important! Do not put any objects in the vent holes of your product. To put any objects in the vent holes of the product may cause fire or short circuit of the inner parts of your product. Heat & Fire Do not put your "INTERACTIVE BOARD" product near fire or any kinds of high temperature source like heaters.
1. CHAPTER: MEETING THE "INTERACTIVE BOARD" Congratulations for buying our the 84" INTERACTIVE BOARD product! The "INTERACTIVE BOARD" combines the 84" LED monitor and touch-screen features and offers a modern design that can be easily adapted to all working conditions. All components of INTERACTIVE BOARD product are used easily and so user friendly. Besides having a compact design, this product supports several functional features. Touch screen and high definition speakers are two of these features.
2.CHAPTER: INFORMATION ABOUT USAGE OF "INTERACTIVE BOARD" and ITS FUNCTIONS Turning on and off your "INTERACTIVE BOARD" Turning on the system After ensuring that the "INTERACTIVE BOARD" is plugged, press the power button of the appliance for a time shorter than 1 second.
RS232 Command Table 12
Function Buttons and Remote Control "INTERACTIVE BOARD" has 6 function buttons. These buttons and the remote controls are displayed in the next page: Down Up Volume/Brightness Touch Screen (On/Off) Source Selection System Sistem On/Off Açma / Kapama Important! To activate or inactivate the keypad located in the front, press the touch screen for 4 seconds.
Important! The empty batteries should be replaced with the equivalent new batteries.
Definition of Source Transition Definition of Source Transition by Button Chart Press the source “ ” button to reach the TV menu by button chart. The menu will be displayed as below. The desired mode can be selected by choosing up or down by brightness or voice buttons on the button chart. Source Switching with remote control Description TV menu can be reached by the source button on the remote control.
If the chosen source has no signal, a warning is displayed as below.
3.CHAPTER: Touch screen 84" touch screen with the feature of multi-spot touch (6 spot at the same time) and infrared technology. Using the Touch Screen with External Battery Touch screen is integrated with Embedded Computer Module. IF you want to use the touch screen when an external source is connected via HDMI or VGA, please connect the external source to "INTERACTIVE BOARD" via a USB-USB cable. Connect that cable to the displayed UB input as shown. Touch screen will be active in a short time.
Touch Screen Configuration Instructions 3.2.1. Opening Touch Screen Configuration (1)Click "Touch-screen Configuration" in the Start menu; (2) The touch screen configuration window pops up: Touch Screen Configuration Interface 3.2.2. Calibration (1) Function description Sometimes due to the hardware installation , the finger clicking position and the cursor position after clicking have larger deviation, and using this feature can calibrate the cursor position after clicking.
Calibration screen Calibration verification In the Settings panel, select "Multi-touch" or "Mouse" for operating mode, and then click "Apply" or "Done" to confirm, or else the setting will be failed.
Click the "Advanced Settings" button on the Basic Settings panel to pop up the Advanced Settings window, set the appropriate data and click "Done", and the system will save the data, or click the "Cancel" button to cancel the data setting. Advanced Settings Click the "Reset" button on the Settings panel to pop up the confirmation window, and click "Yes" to restore the factory settings, or click "No" to cancel.
HEADPHONE JACK MICROPHONE JACK VGA PORT AUDIO IN AUDIO OUT Depending on the model, the product image may be different from the product you buy.
Image transfer by an external source via HDMI 22
Image transfer by an external source via VGA Important! To transfer image and voice transfer via VGA at the same time, except for the VGA cable, a voice transfer cable should be also used as shown (3.5 mm stereo).
4. CHAPTER CONNECTION OF OTHER DEVICES ON "INTERACTIVE BOARD" AND SOUND You can increase the efficiency of your device, you can connect other peripheral devices on the "INTERACTIVE BOARD". Please read the instruction manuals of these peripheral units provided by their manufacturers while using them. In this section, installation of the following devices is described: USB Devices Connecting the USB devices "INTERACTIVE BOARD" has 2 USB2ç0 (Optional ) and 2 UB3.
Voice in "INTERACTIVE BOARD" Important! Before use the voice function of "INTERACTIVE BOARD", please be sure that voice driver given with the device is installed. In case of any sound distortions during recording, please decrease microphone volume.
5. CHAPTER Processing System (Optional) Windows 8 (Optional) Drivers (Optional) A Driver CD is also given to you with 4K(3840x 2160) . The drivers in that CD are updated drivers providing your device to function properly. Copies of drivers in the CD are also in D index of your device. You can get the updated drivers from the Service Centre. You should install the drivers of your processing system.
Screen Resolution of "INTERACTIVE BOARD" Screen resolution of "INTERACTIVE BOARD" is adjusted in two ways. Via operating system; Click right on your mouse and choose screen resolution. Adjust the screen resolution as 1920x1080 form the graphic chart. The smart board turns the 2k resolution (1920x1080) to 4K (3840x 2160).
Via the screen chart control panel; Important! If the resolution will be adjusted via the control panel, the "Scaling" tab certainly should be selected as "Save Screen Scaling". The calibration of your touch screen will be distorted if that option is not selected.
Network Connection Using the Network Connection Option Your "INTERACTIVE BOARD" product has a 10/100/1000 Lan module and it connects "INTERACTIVE BOARD" to other computers on the network. It supports a data transfer rate up to 10/100/1000 Mbps. The integrated network module is accompanied by a RJ-45 connector. Wireless Network Connection Wireless network connection, which enables users to connect wireless networks, provides great convenience for data transfer.
Windows 8.1 System Recovery (Optional) 1. To display the charm bar, move the pointer to right top. As an alternative, you can also press Win+C buttons together. 2. Now, click on the Settings and choose "Change PC settings". 3. It'll open new Metro Control Panel screen. Click on "Update and recovery" tab and in right-side pane, you'll see "Remove everything and reinstall Windows" option.
4. Click on "Get started" button and Windows will show you Reset PC wizard. 2. Just follow the instructions given on screen and your Windows 8 computer will reset to default settings i.e. it'll reinstall Windows from scratch. Note: You will need to reinstall the drivers and Touch Service from the supplied DVD.
6.CHAPTER SYSTEM BIOS INFORMATION USING BIOS ACTIVELY Using BIOS actively This section explains points on the integrated software of your Interactive Monitor. This BIOS (Basic Input Output System) software cluster, critical for your device, is stored on a chip on the mainboard. With this software, your hardware shall be matched with the selected operating system and the system shall be prepared in coordination. BIOS includes both POST (Power On Self Test) and Aptio Installation Software sections.
Keyboard Key Function Enables you to make a selection between menus and options. 1) Opens the options is menu checkboxes. 2) Changes the values. 1) You need to press enter at the point where you want to go to a sub-menu. 2) Enables you to open and close the sub window. Enables you to shift from one area to another. 1) Enables you to exit from the main menu. 2) Enables you to return to main menu when you are in a sub-menu. 3) Enables you to close the window when you are in a sub-window.
Antropi Teach Installation (Optional) Antropi Teach is displayed in full screen to provide more usable space. Antropi Teach controls the updates when first opened. If there is an update, the user is informed by a warning. Overview When Antropi Teach is active, there is portable main toolbar on left. That toolbar can be moved to anywhere on the screen and be specialized. Colours are displayed by keeping the top of the toolbar.
There is an invisible recycle bin on bottom edge of the screen. This enables the shapes, visual and auditory objects to delete easily. Choose an object to delete via the choosing device and drop when the cleaner changes its colour and becomes apparent. File Options Antropi Teach has advanced file options. Antropi Teach can save the current files in its unique format (*.ants) and open the files in that format. Except for the ANTS, Antropi Teach supports all other common file formats.
6. CHAPTER: Power Management In this section, we will describe how you may use your power settings in most effective way. Please read carefully the power management instructions below. This will ensure security and best performance of your system.
7. CHAPTER USING YOUR "INTERACTIVE BOARD" MORE EFFICIENTLY Paying attention to the following points with respect to your "INTERACTIVE BOARD" will provide a stable performance and also prolong its life. Following titles are covered under this section: Securing your "INTERACTIVE BOARD" Daily maintenance of your product Securing your "INTERACTIVE BOARD" The methods described here will help you protect your "INTERACTIVE BOARD" and your data.
8. PART: TROUBLESHOOTING Some troubleshooting issues are mentioned in this chapter under the following titles: Prior points to be cared Frequently asked questions Restarting your system Prior points to be controlled When a problem occurs, it is very important to diagnose this problem in the correctly. Try to find out what it is. Determine what causes the problem and under which category it falls. Please check that your BIOS is up-to-date and your BIOS settings are set to optimum.
FREQUENTLY-ASKED QUESTIONS Hardware problems Symptom: "INTERACTIVE BOARD" does not recognize the new equipment. Check the following: Check that the relevant driver is installed properly. Carefully read the explanations in the manual of the hardware. Ensure that all cables are connected correctly and properly. Be sure that the external device powered. Hard disk problems Symptom: Hard disk does not appear at Bios information. Check the following: Check that your BIOS settings are adjusted properly.
Check the following: Check that its driver is properly installed and its data and power cords are properly connected. Software Problems Symptom: The appliances do not work. Check the following: Be sure that the application is installed properly. In case you receive any error messages, refer to the manual provided with the application. Search the error over the internet. This will give you a general idea about the problem. Sound Issues Symptom: There is no voice from "INTERACTIVE BOARD".
Check the following: Make sure that "the correct driver is installed for the USB device" Other Issues: Symptom: System hour and date is not correct. Check the following: You can adjust system clock and date from BIOS or operating system. If the system clock and date is not displaying the value you have entered every time you turn the system on, your BIOS battery may be dead and you may need to change it. Consult to the technical service regarding this matter.
Restarting the "INTERACTIVE BOARD" product If your "INTERACTIVE BOARD" system is frozen or stopping frequently because of an error, you may need to restart your system. In case the product does not respond to an attempt to shut down from the operating system, hold down the power button for 4 seconds. Important! Shutting "INTERACTIVE BOARD" down as described above results in loss of all unsaved data. Warning! This is an A class device.
The lifetime of your device stated and declared by the Consumer Protection and Market Surveillance General Directorate under T.R. Ministry of Customs and Commerce (the period for retaining parts required for the proper functioning of the device) is 5 years.
