Professional Mixing Controller OWNER'S MANUAL VESTAX CORPORATION 1-18-6 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan Phone:03-3412-7011 Fax: 03-3412-7013 Web:www.vestax.com VESTAX (Europe)Ltd. Unit 5 Riverwey Industrial Park Alton, Hampshire GU34 2QL England, U.K Phone:(0)1420-83000 Fax: (0)1420-80040 Web:www.vestax.co.uk Vestax Technical Center of America 8489 W.Third Street Ste.1044 Los Angeles CA 90048 Phone:1-323-801-2111 Fax:1-323-801-2112 Vestax Europe Technical Support Rheinstr.
CONGRATULATIONS！ Thank you for purchasing the VESTAX PMC37Pro, Professional Mixing Controller. Please read this owner's manual carefully before you start to use your mixer in order to fully understand all of the special features.
IMPORTANT SAFEGUARDS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10.
same characteristics as the original parts. a. When the power-supply cord or plug is Unauthorized substitutions may result in damaged. fire, electric shock or other hazards. b. If liquid has been spilled or objects have fallen into the product. 17. Safety Check-Upon completion of any c. If the product has been exposed to rain or service or repairs to product, ask the water. service technician to perform safety checks d.
FEATURES ●Matrix input assign system allows instant selection of multiple sound sources for any input channel. Incredibly, for the first time, one turntable could be assigned to every program channel. ●3 band isolator (slide volume control) on each program channel for extreme mixing techniques. ●Sweep filter control cuts or boosts a narrow frequency band giving DJs a new creative tool to add flanging type effects to their performance.
PROGRAM SECTION the volume of R over L channel. A counter clockwise rotation increases the volume of L channel over R. 1 INPUT 2 PHONO 2 tISOLATOR ON/OFF SWITCH When set to "OFF", a full range signal is transmitted regardless of the position of any isolator controls. INPUT 3 LINE 2 PHONO 3 LINE 3 PGM 2 2 INPUT ASSIGN 1 3 3 4 5 yISOLATOR [HI/MID/LOW] Cuts and boosts each frequency range. The level is flat when this knob is set at center (click point).
CROSS FADER SECTION !4C.F. CURVE CONTROL Adjusts the crossfader curve. Counter-clockwise rotation gives a gentle crossfade, good for long running mixes. Clockwise rotation gives a steep crossfade, suitable for scratching and cutting. C.F. MODE 14 13 1 ○ 2 ○ 3 ○ L E V E L CROSS FADER A B POSITION POSITION POSITION !3CROSS FADER Mixes the signal assigned by C.F. ASSIGN SWITCH f i g - A CROSS FADER CURVE (!0) to A side of the crossfader and B side.
MIC-AUX SECTION @5MAIN MIC LEVEL VOLUME Adjusts the input level of the MAIN MIC input (#7). @6SUB MIC LEVEL VOLUME Adjusts the input level of the SUB MIC input (#8). @7MIC EQUALIZER [HI /LOW] Adjusts the HI and LOW frequencies for both the MAIN and SUB MIC input. @8MIC AUX SEND SELECT Allows the input signal from MIC inputs to be sent to AUX1 and AUX2. Turn this control counterclockwise to send output to AUX1. Turn clockwise to send output to AUX2.
REAR PANEL 39 40 41 42 CAUTION WARNING;SHOCK HAZARD-DO NOT OPEN. AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR. R MASTER OUTPUT SUB MASTER L R L R AUX 2 RISK OF ELECTRIC SHOCK. DO NOT OPEN EFFECT SEND AUX 1 L L LINE 3 LINE 4 SERIAL NO.
HOW TO CHANGE THE FADER UNIT Note Use a No. 1 Phillips screwdriver. HOW TO REMOVE THE TOP PANEL q Remove all fader knobs and the 5 screws which fix the top panel. (See fig-C) wRemove the top panel. HOW TO CHANGE THE FADER UNIT 〔fig-C〕 qRemove the screws on the fader panel. (See fig-D) Caution When you change any parts, do not loosen the screws with marking. wRemove the fader unit from position in mixer. (See fig-D) eCarefully remove the multi-cable connector from fader unit.
CONNECTION DIAGRAM [example] SPEAKER SPEAKER AMPLIFIER AMP. 〔e.g. VESTAX PT-X1000A〕 CHANNEL A MINI CHANNEL B MAX MINI PROTECT B.T.L POWER MAX PEAK PEAK POWER INPUT INPUT ON / OFF INPUT CD,MD player,TAPE DECK etc :connect to LINE input jack of PMC-37Pro CD PLAYER 〔e.g. VESTAX CDX-35〕 CD PLAYER 〔e.g. VESTAX CDX-35〕 OUTPUT OUTPUT LINE IN L ／RED MASTER OUTPUT SUB MASTER L R L R AUX 2 ／WHT RISK OF ELECTRIC SHOCK. DO NOT OPEN EFFECT SEND AUX 1 L R L LINE 3 LINE 4 SERIAL NO.
SPECIFICATIONS NOMINAL INPUT IMPEDANCE INPUT PHONO 1∼4 （RCA PIN JACK） -45dBv 470Ω SECTION LINE 1∼4 （RCA PIN JACK） 0dBv 47KΩ MIC （1/4" PHONE JACK） -50dBv 47KΩ 0dBv 3.3KΩ NOMINAL OUTPUT LOAD IMPEDANCE EFFECT RECEIVE（1/4" PHONE JACK） OUTPUT MASTER （TRS BALANCED JACK） +4dBv ＞10KΩ SECTION SUB MASTER （1/4" UNBALANCED JACK） 0dBv ＞10KΩ REC.
