Professional Mixing Controller OWNER'S MANUAL VESTAX CORPORATION VESTAX America VESTAX (Europe)Ltd.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTl0N：TO REDUCE THE RlSK OF ELECTRlC SHOCK DO NOT REMOVE COVER（OR BACK） NO USER-SERVICEABLE PARTS INSIDE REFER SERVlCING T0 QUALIFIED SERVlCE PERSONNEL The lighting flash with arrowhead symbol，within an equilateral triangle，is intended to alert the user to the presence of uninsulated“dangerous voltage”within the product's enclosure that may be of sufficient magnitude to consitute a risk of electric shock to persons． The exclamation point within an equilateral tr
CONGRATULATIONS！ Thank you for purchasing the VESTAX PMC -270A，Professional Mixing Controller．As The top of the line, the PMC-270A is a high specification mixer designed to meet the most professional requirements of the Dance Music DJs. Please read this owner's manual carefully before you start to use your mixer, so that you will fully understand all of the special features and enjoy the full use of the product. IMPORTANT PRECAUTIONS To prevent electric shock, do not remove the cover.
TOP PANEL PROGRAM INPUT SECTION PMC-270A PRO FESSIONAL MIXING CONTROLLER LINE 4 IN PGM 1 SUB INPUT L LINE 2 PHONO 1 MIC MASTER INPUT MIC-1 LINE 4 PHONO 2 LINE 6 PHONO 3 LINE 3 LINE 1 TRIM LINE 5 +8 +5 +5 +3 +3 +1 +1 TRIM TRIM MIN MAX BAL MIN MAX MAX BAL L MIN MAX BAL R L R EQ HI EQ HI MIC-2 MIN L CUE +8 MIC-2 MIC-1 MICROPHONE AND SUB INPUT SECTION PGM 2 INPUT R 0 0 -1 -1 -3 -3 -5 -5 -7 -7 -10 -10 -15 -15 POWER POWER MASTER SECTION R
PROGRAM INPUT SECTION PGM 1 INPUT 1 LINE 2 PHONO 1 LINE 1 TRIM 2 MIN MAX BAL 3 L R EQ HI -16dB +16dB MID 4 -12dB +12dB LOW -16dB +16dB EFFECT 5 PRE OFF POST CUE 6 OFF SIGNAL 10 9 8 7 6 7 5 4 3 2 1 ON PROGRAM INPUT SECTION 1. INPUT SELECTOR Used to select input (2 line or 1 phono) to be sent to each PGM channel. 2. TRIM CONTROL Adjusts the Input level of each channel. Set INPUT FADER to 7- 8position. adjust TRIM so that the INPUT LEVEL METER shows about 0dB. 3.
MICROPHONE, SUB INPUT SECTION LINE 4 IN 9 L R MIC 10 MIC-1 MIC-2 MIC-1 11 MIN MAX MIC-2 MICROPHONE, SUB INPUT SECTION 9. LINE INPUT JACK(LINE4) Input connectors for line level equipment such as CD players,tape decks ,DATs, or MDs etc. 10. MIC INPUT JACK(MIC1,2) Input jacks of mic1, mic2. 11. MIC LEVEL Adjusts the input level from all of the microphone inputs. 12. MIC EQUALIZER(HI,LOW) Adjusts the HI and LOW frequencies for all of the microphone input. MASTER SECTION 13.
ISOLATOR SECTION ISOLATOR SECTION 25, HI SWITCH Allows cutting off the sound of treble range. Sound volume will be cut when the switch is set downwards. When the switch is put back, the output volume returns to normal. Can be useful for cutting off the sound of the cymbals or high hats for example. 26, MID SWITCH Allows cutting off the sound of the middle range. Sound volume will be cut when the switch is set downward position. When the switch is put back, the output volume becomes normal sound volume.
Specification ●NOMINAL INPUT LEVEL／IMPEDANCE PHONO −42dB／470k LINE −10dB／47k MIC −42dB／303k EFFECT RCV −10dB／47k ●RATED OUTPUT LEVEL／IMPEDANCE LINE OUT −4dB／10KΩ REC OUT −10dB／10kΩ EFFECT SEND −10dB／10kΩ Vestax Corporation ●FREQUENCY RESPONSE ●S/N RATIO ●DIMENSION ( WXHXD ) ●WEIGHT 20Hz∼20kHz (＋0，−3dB) −80dB W290mmX H80mm X D380mm 5kg
