User manual

LINE 4 IN
MIC
OFF
POST
ONOFF
EFFECT
CUE
LR
MAXMIN
MIC-1
MIC-1 MIC-2
MAXMIN
MIC-2
+16dB-16dB
+16dB-16dB
HI
LO
EQ
9
10
11
12
13
14
5
Top panel
Driver
Main panel
■HOW TO REMOVE THE TOP PANEL
○
1
Remove each fader knobs and 10 screws which
fix the top panel.
○
2
Remove the top panel.
■HOW TO CHANGE THE FADER UNIT
○
1
Remove the screws on the fader panel.
○
2
Remove the fader unit from position in mixer.
○
3
Carefully remove the multi-cable connector from
fader unit.
○
4
Attach multi-cable connector
to new fader unit.
○
5
Position the fader unit
carefully and secure
with screws.
○
9
LINE INPUT JACK(LINE4)
Input connectors for line level equipment such as CD players,tape decks
,DATs, or MDs etc.
○
10
MIC INPUT JACK(MIC1,2)
Input jacks of mic1, mic2.
○
11
MIC LEVEL
Adjusts the input level from all of the microphone inputs.
○
12
MIC EQUALIZER(HI,LOW)
Adjusts the HI and LOW frequencies for all of the microphone input.
○
13
EFFECT SWITCH
Used when sending signal to the external effect processor connected to the
effect SEND/RETURN.
○
14
CUE SWITCH
Used to send the signal from the mic channel to the monitor section for
headphone monitoring.
HOW TO CHANGE THE FADER UNIT
MICROPHONE, SUB INPUT SECTION
Driver