Technical information

Appendix D – eBox-2300 Technical Information
eBox-2300 is design and built using Vortex86 System-on-Chip. It has similar architecture as typical x86
CPU based CEPC.
eBox-2300 has an IDE interface internally to support EmbedDisk or any IDE bootable flash storage using
the standard 44-Pin IDE interface (the same interface used on the common 2.5” IDE notebook hard
drive). eBox-2300 uses AMI BIOS and can boot from DOS, Windows 98, Windows XP, Windows XP
Embedded and Windows CE using boot loader.
eBox-2300 is designed and manufactured by ICOP Technology Inc., a Gold Level Partner in Microsoft’s
Windows Embedded partner program, and recognized by Microsoft as 2005 Partner-of-The-Year in the
Independent Hardware Vendor (IHV) category.
URL:
http://www.icoptech.com Email: [e-mail]
eBox-2300 has all the typical I/O peripherals as
the desktop PC.
• VGA
• PS/2 Keyboard and Mouse
• Ethernet
• Serial
• USB
• Audio output
• Microphone input
• CompactFlash
eBox-2300 System Specification
CPU
Vortex86 SoC (System on Chip)
Main Memory
128MB SDRAM
BIOS
AMI BIOS
VGA
AGP Rev.2.0 Compliant
Resolution up to 1,280x1,024 High Colors
Audio
AC97 CODEC, Fully Compliant with AC97v2.1
LAN
Realtek 8100B, 10/100Mbps Ethernet
On-Board IDE
Enhanced IDE interface, 44-pin box header x 1
Keyboard and Mouse
PS/2 Keyboard and Mouse
Peripheral
1. USB V1.1 ports x 3
2. Serial port x2(This function only available for
eBox-2300-JSK)
3. Audio(Mic-in, Line-in)
4. Type I/II CF Slot (Support Micro Driver)
Dimension & Weight
115 x 115 x 35 mm / 505g
OS Support
DOS
Windows CE.NET 4.2
Windows CE 5.0
Windows Embedded CE 6.0
Windows XP Embedded
Power Requirement
+5VDC
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 47 of 53