Technical information

Enable the associated check box to select the following build options.
• Enable eboot space in memory (IMGEBOOT=1)
• Enable event tracking during boot (IMGCELOGENABLE=1)
• Enable kernel debugger (no IMGNODEBUGGER=1)
• Enable KITL (no IMGNOKITL=1)
• Flush tracked events to release directory (IMGAUTOFLUSH=1)
Un-check “Run-time Image Can be Larger than 32MB” to disable this build option. This
build option sets the IMGRAM64 environment variable which in turn sets the system memory to
64MB. The eBox-2300 has 128MB system memory. The BSP is configured to utilize 128MB
system memory by default.
Click “OK” to close Platform Settings screen.
From the VS2005 IDE, select Build | Build Solution to build the debug image from the OS
Design project.
After the debug image build process is completed, follow the procedure in “Download Image to
eBox-2300” (page 24) to download the debug image to eBox-2300.
After the debug image is downloaded to eBox-2300, the Platform Builder IDE should look
similar to the following screen.
Fig. 43 - VS2005 IDE
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 40 of 53