Technical information

Debug Information
While it’s not within the scope of this guide to cover in depth development and debug issues, we
feel it’s informative to point out some of the built-in debug resources Platform Builder provides.
Using the same Platform Builder project, “eBox2300”, created in the earlier part of this guide.
Switch to “Debug” build mode to build a “Debug Image” with the following “Build Options”.
From VS2005 IDE, select Build | Configuration Manager… to bring up the Configuration
Manager screen. From the Active solution configuration selection options, select
ICOP_Vortex86_60CS x86 Debug and click the Close button to set the OS Design to generate
a debug image.
Fig. 41 - Configuration Manager
From VS2005 IDE, select Project | eBox2300 Properties… to bring up the OS Design Property
screen. Click to expand the Configuration Properties folder and select Build Options.
Fig. 42 - Configuration Manager
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 39 of 53