Technical information

In the earlier part of this guide, during the Platform-Setting/Environment-Variable step,
BSP_VS2005_CORECON environment variable is added to the OS Design. This step triggers
Platform Builder to include the above Corecon files, included with ICOP_Vortex86_60CS BSP,
to the OS image.
To establish a connection between the eBox-2300 and the Visual Studio 2005 development
station, the following steps need to be carried out.
The eBox-2300 IP Address is needed when setting up the device properties within VS2005 to
establish connection between eBox-2300 and VS2005 development station.
• From eBox-2300 desktop, with CE 6.0 running, click on Start | Run from CE 6.0
desktop with the cmd command to open a console command window.
Fig. 31 - CE 6.0 desktop – executing cmd command
• From within the console command window, type s IpConfig to view the eBox’s assigned
IP-address.
Fig. 32 - CE 6.0 console command window
eBox-2300 Windows Embedded CE 6.0 JumpStart rev 3.5 Page 34 of 53